SW900 code list · SW900 Display

Error 1 on SW900 Display

What it means + how to fix it From the manual

Quick answer

Error 1 on the SW900 means “Save.” This is a normal mode, not a fault. To clear it: turn it off and on again.

The SW900 manual lists code 1 as "Save" and describes no fault for it.

Try this first

Free, and each takes under 5 minutes.

  1. Turn it off and on again
  2. Write down when it happens
  3. Look it up in your bike's own manual

In plain English

The code list marks this number as reserved or gives it no fault meaning. You may never see it. If it appears and stays on, write down exactly when it happens and check your bike's own manual, because sellers sometimes change these tables.

Step-by-step checklist

Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.

Parts you might need

As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.

Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.

  • Electrical contact cleaner spray

    Cleans dirt and corrosion from connector pins and battery contacts.

    Link coming soon

Still not fixed?

Pages to try next:

When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.